WHIRLPOOL CABRIO WASHER ERROR F54 EXPLAINED

Cabrio Washer error f54

Whirlpool Cabrio Washer Error F54

The Cabrio Washer F54 error happens when the motor control in the main control board detects high current from the motor module, some things you can do to try an fix this error are listed below:

  1. Spin the basket by hand and see if it spins freely, if not then there is some kind of mechanical friction stopping the basket from spinning properly.
  2. Remove the back of the console and check the P5 and P10 connectors on the main board, makes sure they are properly seated in the board and that the wires are not broken or burned. Unplug P5 and P10 and plug them back in.
  3. Try and run a cycle and if the error persists then there are some diagnostic steps you can take using an ohm/volt meter, if you have a meter and would like to do these tests let us know and a tech can help you in live chat.

If you need the specific diagnostic steps to take for the Whirpool Cabrio Washer Error F54 then click on the live tech help button at the bottom right of the page and let one of our technicians help you in live chat. You can also  visit our Tech Help Service Center and order a Custom Whirlpool Cabrio Washer Error F54 Repair Guide.

This error code applies to the models below in the tag section and many more.

Add a Comment

Your email address will not be published. Required fields are marked *