WHIRLPOOL CABRIO WASHER ERROR UL EXPLAINED

Cabrio Washer Error UL

Whirlpool Cabrio Washer Error UL

The Cabrio Washer UL error code stands for un-balanced or off-balanced load which means the control has recognized the the tub is off balance during the spin cycle. This code will be shown as the washer control tries to balance out the load if its successful Cabrio Washer Error UL will clear from the display,  if not it will continue to blink until the lid is opened. Steps to take to remedy this error are listed below.

  1. Open the lid and adjust the clothes in the tub so that its a balanced load.
  2. If that does not help or its an ongoing issue then the stator (motor) may be cracked causing the unit to become unbalanced during spin. You will need to remove the rotor from the bottom of the washer and inspect the stator for cracks in the white plastic housing, even a hairline crack can cause this problem. If you find the stator is cracked you will need to replace it.
  3. The tub suspension rods may be worn out and need replacing these are the 4 rods attached to the tub that look like mini shocks.

If you need help with diagnosing this error code click on the live tech help button at the bottom right of the page or visit our Tech Help Service Center and order a Custom Whirlpool Cabrio Washer Error UL Repair Guide.

This error code applies to the models below in the tag section and many more.