WHIRLPOOL CABRIO WASHER ERROR F5E3
The Cabrio Washer F5E3 error code means the lid lock will not unlock or the lock assembly has failed.
- This error can happen if there is anything heavy on the washer lid that is putting the lid lock bolt in a bind not allowing it to release.
- Check the lock for interference and make sure nothing is blocking the lock bolt from retracting, sometimes soap scum build up can cover the lock bolt opening and prevent it from being able to retract.
- If the lock assembly looks ok and there is no interference then most times the lock assembly will need to be replaced. In some cases it can be the main board at fault, this is not very common but can happen.
- There are some diagnostic steps you can take with an ohm/volt meter to determine 100% what the cause of the failure is. If you need help with these steps let us know.
In most cases, this error code is caused by a failed lid lock assembly. The lock assembly can be ordered from the link below:
If you need the specific diagnostic steps to take for the Whirlpool Cabrio Washer Error F5E3 then click on the live tech help button at the bottom right of the page and let one of our technicians help you in live chat. You can also visit our Tech Help Service Center and order a Custom Whirlpool Cabrio Washer Error F5E3 Repair Guide.
This error code applies to the models below in the tag section and many more.
E3F5 code- lock assembly, model # WTW8500DC0
Part to order please?
The lock assembly you need for that model can be ordered from the link below:
https://prismparts.com/products/whirlpool-washer-lid-lock-latch-assembly-pp4149995?_pos=3&_sid=89aaffdf8&_ss=r
F5E3 error for Cabrio top load washer. Latch lid replacement link please.😊
Model #: WTW8040DW0
Hello,
The lid lock assembly you need for that model can be ordered from the link below.
https://prismparts.com/products/whirlpool-cabrio-washer-lid-lock-latch-assembly-pp5344895?_pos=5&_sid=6b65ce026&_ss=r
i NEED A NEW LID LOCK ASSEMBLY FOR AMODEL NUMBER WTW7040DW0
The lid lock assembly you need for that model can be ordered at the link below:
https://prismparts.com/products/whirlpool-cabrio-washer-lid-lock-latch-assembly-pp5344895?_pos=5&_sid=f33600a4c&_ss=r
Can this lock be bypassed and not throw a error code?
No it can’t be bypassed like the older washers.
I need a new lock assembly for model WTW8500DR2
The lid lock assembly you need is linked below:
https://prismparts.com/products/whirlpool-washer-lid-lock-latch-assembly-pp4149995?_pos=2&_sid=790ee995c&_ss=r
There is nothing on top of the washer but the F5E3 error is flashing and the manual just tells me to remove items off the washer lid. I unplugged the machine, and it continued to give me the message after plugged it in again. I am guessing that the mechanism is just shot and needs to be replaced. My model number is W10607424A. Can you please tell the lid lock mechanism to be ordered?
So yes you would need to replace the lid lock assembly. The lock assembly you would need is linked below:
https://prismparts.com/products/whirlpool-cabrio-washer-lid-lock-latch-assembly-pp5344895?_pos=1&_sid=efdee9825&_ss=r
Hi, I have the E3F5 error message with model WTW7040DW0.
Could you please send me the link for the lid lock assembly?
Thank you so much!
The lid lock assembly you need for the model listed is linked below:
https://prismparts.com/products/whirlpool-cabrio-washer-lid-lock-latch-assembly-pp5344895?_pos=5&_sid=7b4951d59&_ss=r
I need whirpool cabrio top load washer part number for model WTW7000DW1….LOCKING LID ISSUE…..
The lid lock assembly for the model you listed can be ordered from the link below:
https://prismparts.com/products/whirlpool-cabrio-washer-lid-lock-latch-assembly-pp5344895
I need the part number for the lid lock for WTW7300DW0
The lid lock assembly for the model you listed is linked below:
https://prismparts.com/products/whirlpool-washer-lid-lock-latch-assembly-pp4149995
Same issue what part do I order? WTW8500DR0
Is it easy to replace? Or do I need to hire someone??
The part you need to order is linked below:
https://prismparts.com/products/whirlpool-washer-lid-lock-latch-assembly-pp4149995?_pos=3&_sid=a82852a2c&_ss=r
The video below shows how to replace it:
https://www.youtube.com/watch?v=Nx6tJnyAi0Y
What lock replacement part do I need for model number: WTW7000DW0?
The door lock assembly you need for that model can be ordered from the link below:
https://prismparts.com/products/whirlpool-cabrio-washer-lid-lock-latch-assembly-pp5344895?_pos=1&_sid=8f48220df&_ss=r
I have an F5E3 error. The lid trays to lock/engage but doesn’t and keeps trying for about 15 seconds. I’ve cleaned the area around the lock, unplugged the unit, but it still won’t work. Any ideas? If I need to replace the mechanism, can you tell me what the part number is? My model number is WTW7300DW0.
The door lock assembly you need is linked below:
https://prismparts.com/products/whirlpool-cabrio-washer-lid-lock-latch-assembly-pp5344895?_pos=1&_sid=8729659bc&_ss=r
What lock replacement part do I need for model number: WTW8700EC0
The lid lock assembly you need for that model is linked below:
https://prismparts.com/products/whirlpool-washer-lid-lock-latch-assembly-pp4149995?_pos=2&_sid=8d2e2d66f&_ss=r
Whirlpool model # WTW8500DC1 error code..F5E3..what is my part#please.thanks
The part you need can be ordered from the link below:
https://prismparts.com/products/whirlpool-cabrio-washer-lid-lock-latch-assembly-pp5344895?_pos=1&_sid=ebe8d2cff&_ss=r
My whirlpool cabrio is giving a code E3F5 can you give me a part number for the lid lock please
I will need the model number of the washer to give you the correct part information. Raise the washer lid and look toward the back of the washer frame and you will see a tag with the model and serial number listed on it.
Then reply back with your model number, thanks.
I have a whirlpool cabrio wtw5800bw0 and it has an error e3f5 it’s supposed to be the lid lock so I’m already replaced that part and the error still there .
Another thing is after the washer finish with the wash after 5-10min the washer start as normal wash it self. Whet is wrong ? Please help ?
The main board has failed and will need to be replaced. You can order the new board for that model from the Amazon link below:
Click Here To Order Control Board
I have a Cabrio washer… Its havin the E3F5 problem but its stayin unlocked… What could b the problem since its stayin unlocked? It never had this problem until now…
You need to replace the lock assembly it has failed. If you need the part number write back and give me the washer model number and I will be glad to give you the part number.
I have a whirlpool cabrio washer with a E3F5
Error. I need lid lock part number.
Please give me your model number. Rais the washer lid and look toward the back of the washer frame and you will see a tag with the model and serial number on it. Once you send the model number I can give you the correct part information. Thanks.
Hello, I am having the E3F5 problem with my whirlpool duet front loading washer. We have been instructed to order the replacement door latch. I am happy to install the item myself, the issue is that when I search how to replace it, the instructions say you must access the mechanism through the open door. Our problem is that the door is locked shut, rather than unable to lock. Is there any way to access this mechanism through another path? Thank You.
Hello Dominic,
You can manually open the washer door.
1. Unplug washer or disconnect power.
2. Remove the lower kick panel.
3. Reach up along the inside of the front and locate the bottom of the door switch/lock unit.
4. Located on the bottom of the door switch/lock unit is a tear-drop shaped tab.
5. Gently pull the tab down about a ¼” or until a click is heard.6. The door should be opened.
If your washer model does not have the access panel at the bottom front of the washer then remove the lid off the top of the washer look down on top of the door lock assembly and you will see a white tab, pull up on that tab and the door will open. But this method is only if you do not have the bottom access panel.