WHIRLPOOL CABRIO WASHER ERROR F6E2
The Cabrio Washer F6E2 error code means the user interface board cannot communicate with the main control board.
- Reset the washer by unplugging the washer for 5 minutes then plug it back in and see if the error persists. If the error quits and the washer is working after the reset then the main board just needed a hard reset.
- If the reset did not help then either there is a wiring issue between the user interface and the main board or either the user interface or main board has failed. There are some diagnostic steps you can take using an ohm/volt meter that can determine if the user interface has failed. If you need help with this error let us know.
If you need the specific diagnostic steps to take for the Whirlpool Cabrio Washer Error F6E2 then click on the live tech help button at the bottom right of the page and let one of our technicians help you in live chat. You can also visit our Tech Help Service Center and order a Custom Whirlpool Cabrio Washer Error F6E2 Repair Guide.
This error code applies to the models below in the tag section and many more.
We replaced the control board and the machine still won’t turn on. What should I try next?
The full model number of the washer is needed to give model specific information like that. It also helps to know which board you replaced and the part number of the board.
If the hard reset for the f6e2 error code doesn’t work how I use my volt meter to determine if the user interface or main board is bad?
If you want technical help like that you need to order the Custom Repair Guide with tech help support on our tech help service center page. Click here for more information