WHIRLPOOL CABRIO WASHER ERROR F6E3 EXPLAINED

WHIRLPOOL CABRIO WASHER ERROR F6E3

The Cabrio Washer F6E3 error code means the mainboard cannot communicate with the user interface board.

1. Reset the washer by unplugging the washer for 5 minutes then plug it back in and see if the error persists. If the error quits and the washer is working after the reset then the main board just needed a hard reset.

Buy 2 or more full priced items get 10% off


2. If the reset did not help then either there is a wiring issue between the user interface and the mainboard or the user interface or mainboard has failed. There are some diagnostic steps you can take using an ohm/volt meter that can determine if the user interface has failed.

Shop Whirlpool Now! Get free delivery on major appliances $399+!

3. Download the technical data sheet and follow the instructions listed on page 9 under this error code.  Click Here To Download Technical Data Sheet
4. If you need help with the Whirlpool Cabrio Washer Error F6E3 error let us know.

This error code applies to the models below in the tag section and many more.