Stewart asked 4 years ago
My washer (MODEL: GHW9150PW1 / SERIAL#; CSS4010941) is showing a F-11 code.
It starts and begins to fill but stops after starting to roll the tub then shuts down after showing the F-11 Code
Master Tech Staff answered 4 years ago
The F11 error is a communication error between the central control unit and the motor control unit. In most cases, the motor control unit has to be replaced. The only thing you can do is try and reset the electronics by killing power to it at the breaker/fuse panel on your home for one full minute then restore power. If after that the problem persists replace the motor control unit. The part you need to order is linked below:
https://prismparts.com/products/whirlpool-washer-motor-control-unit-board-pp0936595
The video linked below shows how to replace it:
