March 19, 2024

Cabrio Dryer F01 Error

WHIRLPOOL CABRIO DRYER F01 ERROR EXPLAINED

The whirlpool Cabrio dryer F01 error means the main control has an internal failure. This can happen at any time when a component on the control board has failed but most commonly this happens when your home has a power surge and shorts the main control board. What does f1 mean on my whirlpool dryer? The F1 error on the cabrio dryer is the same as the F01 Error.

HOW TO FIX WHIRLPOOL CABRIO DRYER F01 ERROR

  1. First thing you will want to do is a simple cabrio dryer control board reset, which is done by unplugging the dryer for five minutes then plugging it back in. That will reset the board and put it back in standby mode.
  2. If the dryer continues to give you the same error then the only way to fix it is to replace the control board.
  3. There are currently no recalls or a whirlpool cabrio control board recall for this error.

How To Replace The Control Board

  1. Unplug or disconnect power the dryer.
  2. Remove the two screws at the rear of the console assembly.
  3. Remove the one screw holding the control board to the metal board mounting bracket.
  4. Unplug the wiring to the control board.
  5. Push in the locking tab on the back side of the control board and slide it off the bracket.
  6. Install the new board.

Order The Replacement Whirlpool Cabrio Dryer Control Board W10111616

Whirlpool Dryer f01 Error Repair

How To Replace Whirlpool Cabrio Dryer Control Board W10111616 Video

Below is a video showing how to replace the control board to repair the cabrio dryer F01 error code.

If you have any questions or need any help with fixing your dryer then ask one of our factory trained technicians by clicking the live tech help button at the bottom right of your page.

This repair information applies to all the models listed below in the tags section and many more.

20 thoughts on “HOW TO FIX WHIRLPOOL CABRIO DRYER F01 ERROR

    1. The F4e1 Whirlpool dryer error code is a failure code of the heater relay on the main control board. Check the heating element and make sure it has continuity to be sure it’s good. If the element is good then the main control board on the dryer will need to be replaced. The board you need for model WED8500DC1 is part number WPW10739349.

  1. What is the part number for Whirlpool Dryer model WGD8500DC3 control board that gives me error code F2 E1

  2. Whirlpool dryer WED6200SW1. I’m getting F1 code dryer comes on but doesn’t actully start. I believe I need the control board panel but having hard time finding the exact part number for it

  3. Hi there,
    What part number do I need for a control board for Whirlpool Duet Dryer? It is displaying a F1 error code and unplugging it did not resolve it. The model number is YWED9400SW0. SER number is MW1202122.
    TYPE: CADT-ELE-2406024-EL54
    Thanks!

  4. What part number do I need for a control board for Whirlpool Cabrio Dryer. It is displaying a F1 error code and unplugging it did not resolve. Model number is WED6600VW0

  5. What part number do I need for a control board for Whirlpool Cabrio Dryer. It is displaying a F1 error code and unplugging it did not resolve. Model number is WED6200SW1.

    1. The part number you need to order for that model is WPW10111617, you can get it on Amazon at the link below:

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.