FRIGIDAIRE AFFINITY WASHER ERROR E23
The Frigidaire Affinity Washer Error E23 means either the drain pump has failed or the drain pump relay on the control board has failed. You can try and reset the error by unplugging the washer and plugging it back in. If the error persists after that, you will have to figure out if the drain pump is getting voltage from the control. If it is getting voltage, then the drain pump has failed. If it’s not getting voltage, then the relay on the control board has failed, and you will need to replace the control board to fix the washer.
If you do not have the means to check voltage to the drain pump, you can start by just replacing the drain pump, and if that does not resolve the error, you can replace the electronic control. The parts to fix the Frigidaire washer E23 error are listed below. Make sure to verify the electronic control is compatible with your model Frigidaire washer as the correct control needed varies by model number. We will be glad to check this for you in our free repair help chat.
FRIGIDAIRE WASHER ERROR E23 Repair Parts
Frigidaire Washer Water Drain Pump
Frigidaire Washer Electronic Control Board
If you have any questions about the E23 error, let us know in our free repair chat.
