FRIGIDAIRE AFFINITY WASHER ERROR E35

The Frigidaire Affinity Washer Error E35 means the water level pressure sensor switch indicates the washer is overfilling with water. Things to look for to figure out what is causing the error are listed below:

Does the water level seem to be correct in the machine, and does it stop filling as it should? If so, replace the water level pressure sensor switch. If replacing the water level switch does not fix the problem, then replace the control board.

Does the machine fill with water continuously? If it does not fill with water, continually replace the central control if the error persists.

If it does continually fill unplug the machine and see if it stops loading. If it does not stop filling, replace the water inlet valve.

If it does stop filling after unplugging the washer, check the wiring from the water inlet valve to the control, if the wiring checks out ok replace the main control board.

The parts to repair the Frigidaire washer E35 error code are listed below. The control board for your washer may vary depending on the model number of your machine, so be sure to check with the parts company to make sure you are ordering the correct control board.

FRIGIDAIRE WASHER ERROR E35 REPAIR PARTS

Frigidaire Washer Water Inlet Valve

 

Frigidaire Washer Water Level Pressure Switch

 

Frigidaire Washer Electronic Control Board

If you have any questions regarding the E35 error code, feel free to ask a tech in our free chat.