FRIGIDAIRE AFFINITY WASHER ERROR E41 EXPLAINED





FRIGIDAIRE AFFINITY WASHER ERROR E41

The Frigidaire Affinity Washer Error E41 is a door lock error. It means the primary control thinks the door is open. If the door is closed and this error persists, then in most cases, you will need to replace the door lock assembly on the washer. Sometimes this error can be caused by the control board, but it’s more common for the door lock assembly to have failed than the control board.

Below is the troubleshooting you need to do if you want to determine for sure, which is causing the error. You will need a voltage meter and know how to use it, if not just replace the door lock assembly and if the error continues after that, replace the control board. The parts needed to make this repair are linked below. Be sure to verify with the parts company the correct control board for your model washer.

FRIGIDAIRE AFFINITY WASHER ERROR E41 TROUBLESHOOTING

Locate the J2 plug on the console control board and measure voltage from the black wire to the ground with power on. If there are 0 volts, replace the door lock assembly if there is 110/120 VAC replace the control board.

FRIGIDAIRE AFFINITY WASHER ERROR E41 REPAIR PARTS

Frigidaire Washer Door Lock Assembly

Frigidaire Washer Door Lock Assembly

 

Frigidaire Washer Console Control Board

Frigidaire Washer Electronic Control Board

If you have any questions about the E41 error code, feel free to ask a tech in our free chat.

 

Add a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.