WHIRLPOOL CABRIO WASHER ERROR F8E1 EXPLAINED
April 5, 2017 | Error Codes, Whirlpool Cabrio Washer | No Comments|
WHIRLPOOL CABRIO WASHER ERROR F8E1
The Cabrio Washer F8E1 error code which is the same as the LF or Long Fill error means the main board has not detected a change in the water level in the tub for a period of time.
- Make sure water supply lines on your home are turned on and have proper water pressure supplied to the washer. Also check the screens on the supply lines and make sure they are clear of debris and calcium build up.
- Check the water level pressure switch hose from the tub to the main control for kinks or tears.
- If all the above looks ok then there are tests that can be made with an ohm/volt meter. The most common issue when you get this error is a failed water inlet valve on the machine. If you need help with this error code let us know.
If you need the specific diagnostic steps to take for the Whirlpool Cabrio Washer Error F8E1 then click on the live tech help button at the bottom right of the page and let one of our technicians help you in live chat. You can also visit our Tech Help Service Center and order a Custom Whirlpool Cabrio Washer Error F8E1 Repair Guide.
This error code applies to the models below in the tag section and many more.